 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
ugino's spare, elegant designs are a staple of the keirin circuit, and the company's cranks and rings are among the very few to have received full NJS certification. We thought it was time someone started importing Sugino in depth.
75 SILVER | 75 BLACK | XD || LOCKRING
The silver version of the Sugino 75 is perhaps the single best-known crank on the keirin circuit, giving it a good claim on the 'world's favourite' title. It's a square-taper crank using the track-standard 144BCD, and its sharp, angular looks are quite unlike the flowing lines of most modern European offerings. We normally stock 165 and 170mm variants, both of which ship with neat inset ringbolts but no crankbolts. Click the 'Show me more' button at left to see the crank with different rings. Our biggest seller is the 75/Zen combination from the upper picture, favoured by track riders for the rigid, functional Zen ring. But the elegant 75 ring in the lower picture is now available again. Stock of both is limited to the sizes listed above, but you're welcome to mail us for info on other permutations, and also on availability of other crank lengths. 165mm only in stock, and we're low on rings... |
 By popular request, we now stock the black Sugino 75 plus matching black versions of the 75 and Zen rings. You can see the former at the upper part of the zoomed photo, but since we were out of black Zens at the time of the shoot we used the cheaper Messenger Zen as a stand-in for the latter. We now hold full stock of the more expensive and harder-wearing black Zen. If you happen to fancy the 75/Messenger combo, we can always do it on custom order. Restocking shortly. |
Since Hubjub got started we've been trying to source the Sugino XD, and last winter our persistence was finally rewarded. The XD is a 110BCD squaretaper crank of great strength and elegance, proven over many years. However, with five bolt designs out of fashion, Sugino have taken to chopping out the crank as a cheap triple for entrylevel mountainbikes. Whip off the stock rings, and what remains is a sleek coldforged crank, perfectly suited to 135mm singlespeed applications on- or offroad. We think it goes particularly well with the Surly stainless rings, and we'll give you a free set of ringbolts if you buy both. Restocking shortly. |
|
|
| THIS WAY FOR SURLY RINGS |
|
|
Sugino lockrings fit Kogswell and ENO hubs, bear the NJS stamp yadda yadda, and they have the lettering in contrasting yellow-on-black. Restocking shortly. |
 |
|
|
|
 |
 |
||
|
|
|||
|
|
|
|